manualshive.com logo in svg

Dell P56F, Service Manual, Page: 43 / 87

Share
Download
Dell P56F Service Manual Download Page 43

Removing the heat-sink assembly

WARNING: 

Before working inside your computer, read the safety information 

that shipped with your computer and follow the steps in 

Before working inside your computer

. After working inside your computer, 

follow the instructions in 

After working inside your computer

. For more 

safety best practices, see the Regulatory Compliance home page at 
www.dell.com/regulatory_compliance. 

WARNING: 

The heat sink may become hot during normal operation. Allow 

sufficient time for the heat sink to cool before you touch it.

CAUTION: 

For maximum cooling of the processor, do not touch the heat 

transfer areas on the heat sink. The oils in your skin can reduce the heat 
transfer capability of the thermal grease.

 

Topics:

•

Prerequisites

•

Procedure

Prerequisites

1 

Remove the 

base cover

.

2 

Remove the 

battery

.

Procedure

NOTE: 

The images in this document may differ from your computer depending 

on the configuration you ordered.

1 

Remove the screws that secure the heat-sink assembly to the system board.

2 

Lift the heat-sink assembly off the system board.

18

Removing the heat-sink assembly

43

Summary of Contents for P56F
























































































Reviews:

No comments