Dell P56F, Service Manual

Page: 26 / 87

Replacing the solid-state drive
(half-length)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your computer,
follow the instructions in After working inside your computer . For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the hard
drive.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the screw hole on the solid-state drive bracket with the screw hole on the
solid-state drive.
2 Replace the screw that secures the solid-state drive to the solid-state drive
bracket
3 Align the notches on the solid-state drive assembly with the tabs in the solid-
state drive slot.
4 Slide the solid-state drive assembly at an angle into the solid-state drive slot.
5 Press the other end of the solid-state drive down and replace the screw that
secures the solid-state drive to the system board.
Post-requisites
1 Replace the battery .
2 Replace the base cover .
9
Replacing the solid-state drive (half-length) 26