3. Install the:
a.
b.
c.
After working inside your computer
.
2.5" Hard drive
Removing the hard drive assembly
Before working inside your computer
.
2. Remove the:
a.
b.
3. To remove hard drive assembly:
a. Slide the hard drive release latch into the unlock position [1].
b. Remove the 4 (M2.5x3.0) screws that secure the hard drive assembly to the system .
c. Flip up the tab at the end of the hard drive assembly [3].
d. Lift the hard drive assembly from the system [4].
Removing and installing components
47
