About your monitor |
21
Universal Serial Bus (USB)
This section gives you information about the USB ports available on your monitor.
SuperSpeed USB 5 Gbps (USB3.2 Gen1)
Transfer speed
Data rate Maximum power consumption (each port)
SuperSpeed
5 Gbps
4.5 W
High Speed
480 Mbps 4.5 W
Full speed
12 Mbps
4.5 W
USB upstream port
USB downstream port
Pin number
Signal name
Pin number
Signal name
1
VBUS
1
VBUS
2
D-
2
D-
3
D+
3
D+
4
GND
4
GND
5
StdB_SSTX-
5
StdA_SSRX-
6
St
6
St
7
GND_DRAIN
7
GND_DRAIN
8
StdB_SSRX-
8
StdA_SSTX-
9
St
9
St
Shell
Shield
Shell
Shield
NOTE: SuperSpeed USB 5 Gbps (USB 3.2 Gen1) functionality requires a
SuperSpeed USB 5 Gbps (USB 3.2 Gen1)-capable computer.
NOTE: The monitor’s USB ports work only when the monitor is on or in the
standby mode. In standby mode, if the USB cable is plugged in, the USB ports
can work normally.
Otherwise, follow the OSD setting of USB, if the setting is
“On in Standby Mode” then USB work normally, otherwise USB is disabled. If
you turn off the monitor and then turn it on, the attached peripherals may take
a few seconds to resume normal functionality.
