manualshive.com logo in svg

Dell P2423, User Manual

Share
Download
Dell P2423 User Manual Download Page 9

About your monitor 

│

  9

Product features

The 

Dell P2423

 monitor has an active matrix, Thin-Film Transistor (TFT), Liquid 

Crystal Display (LCD) and LED backlight. The monitor features include:

• 60.96 cm (24 in.) viewable area (measured diagonally). 

 

1920 x 1200 (16:10) resolution, plus full-screen support for lower resolutions.

• Wide viewing angle to allow viewing from a sitting or standing position.

• Color gamut of 99% sRGB.

• Video connectivity with DVI, DisplayPort, HDMI and VGA.

• Tilt, swivel, height and pivot adjustment capabilities.

• Removable stand and Video Electronics Standards Association (VESA™) 

100 mm mounting holes for flexible mounting solutions.

• Equipped with 1 USB Type B upstream port and 4 SuperSpeed USB 5 Gbps 

(USB 3.2 Gen1) Type-A downstream ports.

• Plug and play capability if supported by your system.

• On-Screen Display (OSD) adjustments for ease of set-up and screen 

optimization.

• Power and joystick buttons lock.

• Security lock slot.

• Stand lock.

• < 0.3 W in Standby Mode.

• Optimize eye comfort with a flicker-free screen and low blue light feature.

• The monitor uses Low Blue Light panel and is in compliance with TUV 

Rheinland (Hardware Solution) at factory reset/default setting mode (

Preset 

mode

: 

Standard

).

WARNING: The possible long-term effects of blue light emission from 
the monitor may cause damage to the eyes, including eye fatigue, 
digital eye strain, and so on. ComfortView Plus feature is designed to 
reduce the amount of blue light emitted from the monitor to optimize 
eye comfort.

Summary of Contents for P2423









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands