Steps
1. Align the screw holes of the battery with the screw holes on the palm-rest and keyboard assembly.
2. Place the battery on the palm-rest and keyboard assembly.
3. Replace the eight screws (M1.6x2.5) that secure the battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the system board.
Next steps
1. Install the
.
After working inside your computer
.
Fan
Removing the fan
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
The following image(s) indicate the location of the fan and provides a visual representation of the removal procedure.
18
Removing and installing components
