Steps
1. Place the left fan on the palm-rest and keyboard assembly.
2. Align the screw holes on the left fan to the screw holes on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x3) that secure the left fan to the palm-rest and keyboard assembly.
4. Connect the left-fan cable to the system board.
5. Adhere the Mylar over the system board.
Next steps
1. Install the
.
2. Exit
.
After working inside your computer
.
Removing the right fan
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
.
About this task
The following image(s) indicate the location of the right fan and provides a visual representation of the removal procedure.
Removing and installing components
31
