Dell P143G Service Manual Download Page 4

Page: 4 / 79

I/O board............................................................................................................................................................................. 37

Removing the I/O board............................................................................................................................................ 37
Installing the I/O board.............................................................................................................................................. 38

Speakers.............................................................................................................................................................................. 39

Removing the speakers..............................................................................................................................................39
Installing the speakers.................................................................................................................................................41

Touchpad.............................................................................................................................................................................42

Removing the touchpad.............................................................................................................................................42
Installing the touchpad...............................................................................................................................................43

Display assembly................................................................................................................................................................44

Removing the display assembly............................................................................................................................... 44
Installing the display assembly..................................................................................................................................46

Power button with optional fingerprint reader.......................................................................................................... 48

Removing the power-button with optional fingerprint reader......................................................................... 48
Installing the power-button with optional fingerprint reader........................................................................... 49

Power-adapter port..........................................................................................................................................................50

Removing the power-adapter port......................................................................................................................... 50
Installing the power-adapter port........................................................................................................................... 50

System board...................................................................................................................................................................... 51

Removing the system board......................................................................................................................................51
Installing the system board....................................................................................................................................... 54

Palm-rest and keyboard assembly.................................................................................................................................57

Removing the palm-rest and keyboard assembly................................................................................................ 57
Installing the palm-rest and keyboard assembly.................................................................................................. 58

Chapter 3: Drivers and downloads............................................................................................... 60

Chapter 4: System setup............................................................................................................. 61

Updating BIOS on systems with BitLocker enabled............................................................................................72
Updating the Dell BIOS in Linux and Ubuntu environments..............................................................................72
Flashing BIOS (USB key)........................................................................................................................................... 72

System and setup password...........................................................................................................................................73

Assigning a system setup password....................................................................................................................... 73
Deleting or changing an existing system setup password................................................................................. 74

Chapter 5: Troubleshooting......................................................................................................... 75

Dell SupportAssist Pre-boot System Performance Check diagnostics................................................................75

Running the SupportAssist Pre-Boot System Performance Check................................................................75

Contents

Summary of Contents for P143G
















































































Search results

Summary of Contents for P143G

Reviews:

Related manuals for P143G

Brands by name

Popular brands

Dell P143G, Service Manual

Search results

Summary of Contents for P143G

Reviews:

Related manuals for P143G

Brands by name

Popular brands