Dell P1130 - 21

4            Dell P1130 Color Monitor Quick Setup Guide

Troubleshooting Tips

Monitor Has No Power

If the monitor’s power indicator is off and no image appears on the display, perform the following checks:

Ensure that the power cable is fully inserted in the monitor’s power port and the electrical outlet.

Test the electrical outlet by plugging in a working electrical device such as a lamp.

Ensure that the power button has been depressed, and wait for the power indicator to light.

Try another power cable on the monitor. Use the computer’s power cable and turn on the monitor with the signal cable
disconnected. If the monitor is working correctly, a self-test pattern appears.

No Image Is Displayed on the Monitor

If the monitor power indicator is on but no image appears on the display, perform the following checks:

Ensure that the video connector is seated properly. Tighten the connector screws securely with your fingers.

Ensure that the computer is on.

Increase brightness and contrast controls.

Turn off the monitor and unplug the signal cable. Check the cable connector for bent or broken pins.

With the signal cable still disconnected, turn on the monitor. If the monitor is working correctly, a self-test pattern
appears.

Perform a monitor reset or recall.

IMPORTANT!

Before contacting Dell for technical assistance, refer to the Troubleshooting section in the User’s Guide on

your monitor CD. This section contains detailed information for resolving most monitor problems.

Information in this document is subject to change without notice.
© 2001 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly
forbidden.

Trademarks used in this text: 

Dell 

and the 

DELL 

logo are trademarks of Dell Computer Corporation; Microsoft and Windows

are registered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and
names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other
than its own.

October 2001

01GB02CON-AEP.p65

8/8/01, 2:43 PM

4

Summary of Contents for P1130 - 21" CRT Display

Page 1: ...provide adequate ventilation Do not expose the monitor to rain or use it near water If the monitor accidentally gets wet unplug it and contact an authorized dealer immediately You can clean the exterior of the monitor with a damp cloth when necessary but be sure to unplug the monitor first If your monitor does not operate normally in particular if there are any unusual sounds or smells coming from...

Page 2: ...te the driver perform the following steps 1 Insert the monitor CD into the CD ROM drive 2 Click Start Control Panel Appearance Themes and then click the Display icon 3 In the Display Properties window click the Settings tab and then click Advanced 4 Click the Monitor tab and then click Properties Driver tab Update Driver 5 When the Hardware Update Wizard dialog box appears choose Install the softw...

Page 3: ...rdware Wizard dialog box To manually install or update the driver perform the following steps 1 Click Start Settings Control Panel and then double click Display 2 In the Display Properties window click the Settings tab and then click Advanced 3 Click the Monitor tab and then click Change 4 When the Update Device Driver Wizard dialog box appears follow the steps in the previous paragraph Setting Di...

Page 4: ...nd contrast controls Turn off the monitor and unplug the signal cable Check the cable connector for bent or broken pins With the signal cable still disconnected turn on the monitor If the monitor is working correctly a self test pattern appears Perform a monitor reset or recall IMPORTANT Before contacting Dell for technical assistance refer to the Troubleshooting section in the User s Guide on you...

Reviews: