Storage
Table 28. Storage options
Option
Description
SATA Operation
Allows you to configure the operating mode of the integrated SATA
hard drive controller.
The options are:
•
Disabled
•
AHCI
•
RAID On
—By default, the RAID On option is enabled.
NOTE:
SATA is configured to support RAID mode.
Storage Interface
Allows you to enable or disable various drives on board.
The options are:
•
SATA-0
•
M.2 PCIe SSD-0
•
M.2 PCIe SSD-1
By default, all the options are enabled.
SMART Reporting
This field controls whether hard drive errors for integrated drives are
reported during system startup. This technology is part of the Self
Monitoring Analysis and Reporting Technology (SMART) specification.
By default, the
Enable SMART Reporting
option is disabled .
Drive Information
Provides information about drive type and device.
Display
Table 29. Display options
Option
Description
Display Brightness
Allows you to set the screen brightness when running on battery and
AC power.
The options are:
•
Brightness on battery power
- By default, set to 50.
•
Brightness on AC power
- By default, set to 100.
Touchscreen
Allows you enable or disable the touchscreen for the operating system.
Touchscreen
- By default, all the option is enabled.
NOTE:
Touchscreen always works in BIOS setup irrespective
of its setting.
EcoPower
Allows you to turn on the EcoPower feature in the panel.
Enable EcoPower
- By default, this option is enabled.
EcoPower increases the battery life by reducing the display brightness
when appropriate.
Full Screen Logo
Displays full screen logo when the image matches screen resolution.
By default, all the option is disabled.
26
System setup