Dell OptiPlex 7440 All-In-One W11C, Owner'S Manual

Page: 23 / 80

4. To remove the hard drive bracket:
a) Pry the edges of the bracket to release the hard drive [1].
b) Slide the hard drive and lift it away from the bracket [2].
Installing the hard drive assembly
1. Align the hard drive until the notches are aligned and the hard drive is secured in the bracket.
2. Place the hard drive onto the hard drive cage until the notches are aligned, then slide the Hard Drive assembly until the tab locks into
the cage.
3. Install the:
a) back cover
b) stand
4. Follow the procedure in After working inside your computer .
Optical drive assembly
Removing the optical drive assembly
1. Follow the procedure in Before working inside your computer .
2. Remove the:
a) stand
b) back cover
3. To remove the optical drive assembly:
a) Press the securing tab at the base of the drive to release the optical drive assembly [1].
b) Push the back side of the optical drive [2].
c) Slide the optical drive assembly to remove it away from the computer [3][2].
Disassembly and reassembly 23