Steps
1. Align and lower the system board into the system until the connectors at the back of the system board align with the slots on the
chassis, and the screw holes on the system board align with the standoffs on the system.
2. Replace the three (M3x4) screws and three (6-32) screws to secure the system board to the chassis.
3. Align the slot on the hard drive caddy support with system board and place the hard drive caddy on the system board.
4. Replace the screw (6-32) to secure the hard drive caddy support to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Install the
4. Install the
5. Install the
6. Install the
.
7. Install the
8. Install the
.
9. Install the
10. Install the
.
11. Follow the procedure in
after working inside your computer
.
50
Disassembly and reassembly
Summary of Contents for OptiPlex 7080 Micro
