Installing the WLAN card
Steps
1. Insert the WLAN card into the connector on the system board.
2. Connect the WLAN antenna cables to the connectors on the WLAN card.
3. Place the plastic tab to secure the WLAN cables.
4. Tighten the screw to secure the plastic tab to the WLAN card.
5. Install the:
a.
b.
After working inside your computer
.
M.2 PCIe SSD
Removing the M.2 PCIe SSD
Steps
Before working inside your computer
.
2. Remove the:
a.
b.
3. To remove the M.2 PCIe SSD:
a. Remove the screw that secures the M.2 PCIe SSD [1].
b. Lift and pull out the PCIe SSD from its connector [2].
16
Disassembly and reassembly
