Installing 2.5–inch drive assembly
Steps
1. Insert the drive assembly into the slot on the computer.
2. Slide the drive assembly toward the connector until it clicks into place.
3. Install the
.
After working inside your computer
.
WLAN card
Removing the WLAN card
Steps
Before working inside your computer
.
2. Remove the:
a.
b.
3. To remove the WLAN card:
a. Remove the screw that secures the plastic tab [1].
b. Remove the plastic tab to access the WLAN cables [2].
c. Disconnect the WLAN cables from the connectors on the WLAN card [3].
d. Lift the WLAN card from the connector on the system board [4].
Disassembly and reassembly
15
