3. Install the following components:
a)
b)
c)
d)
4. Follow the procedure in
After working inside your computer
.
Power supply unit fan - PSU fan
Removing the power supply unit fan -PSU fan
1. Follow the procedure in
Before working inside your computer
.
2. Remove the following components:
a)
b)
c)
d)
3. To disconnect the PSU fan cable:
a) Unroute the power supply cables from the retention clips in the PSU fan.
b) Disconnect the PSU fan cable form the socket on the system board [1].
c) Unroute the PSU fan cable from the retention tab [2].
60
Removing and Installing components
Summary of Contents for OptiPlex 5270 All-in-One
Page 1: ...Dell OptiPlex 5270 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Page 54: ...4 Pry and lift the base cover off the middle frame 54 Removing and Installing components ...
Page 58: ...b Slide the PSU and lift it away from the chassis 58 Removing and Installing components ...