manualshive.com logo in svg

Dell OptiPlex 3060 Tower, Service Manual

The Dell OptiPlex 3060 Tower is a high-performance desktop computer designed for professional use. Complete with advanced features and reliable performance, this product is ideal for business environments. To fully optimize your experience, we recommend downloading the Dell OptiPlex 3060 Tower Service Manual. This comprehensive manual is available for free download from our website, ensuring easy access to important user guides and instructions.

Share
Download
background image

Installing memory module

1. To install the memory module:

a. Align the notch on the memory module with the tab on the memory module connector.
b. Insert the memory module into the memory module socket [1].
c. Press the memory module until the memory module retention tabs click into place [2].

36

Removing and installing components

Summary of Contents for OptiPlex 3060 Tower

















































































Reviews:

No comments

Related manuals for OptiPlex 3060 Tower

iFixit Mac Mini Model A1347 Teardown Manual preview
Mac Mini Model A1347
Brand: iFixit Pages: 13
Advantech MIC-7900 User Manual preview
MIC-7900
Brand: Advantech Pages: 94
IBM NetVista 2276 Manual preview
NetVista 2276
Brand: IBM Pages: 75
Jason.L Literail Workstation 6 Person Assembly Instructions preview
Literail Workstation 6 Person
Brand: Jason.L Pages: 4
E.E.P.D. Getting Started Guide Device Reference Manual preview
Getting Started Guide
Brand: E.E.P.D. Pages: 96
Compaq CQ2000 - Desktop PC Manual preview
CQ2000 - Desktop PC
Brand: Compaq Pages: 12
Arbor Technology Rigid-770 Series User Manual preview
Rigid-770 Series
Brand: Arbor Technology Pages: 119
DMP Electronics EBOX-3310MX-S4C User Manual preview
EBOX-3310MX-S4C
Brand: DMP Electronics Pages: 41
Acer Veriton M4618G Service Manual preview
Veriton M4618G
Brand: Acer Pages: 120
StarTech.com ARMSTS Instruction Manual preview
ARMSTS
Brand: StarTech.com Pages: 29
Sharp PN-TPCi7W7 User Manual preview
PN-TPCi7W7
Brand: Sharp Pages: 13
Sharp Shuttle PN-SPCi5W7 Installation Manual preview
Shuttle PN-SPCi5W7
Brand: Sharp Pages: 14
Sharp PN-TPC1W User Manual preview
PN-TPC1W
Brand: Sharp Pages: 14
Sharp PN-L702B Operation Manual preview
PN-L702B
Brand: Sharp Pages: 58
Stanley STST98182-1 User Manual preview
STST98182-1
Brand: Stanley Pages: 23
eMachines L3047 (Spanish) Guía De Referencia preview
L3047
Brand: eMachines Pages: 142
eMachines H5082 Reference Manual preview
H5082
Brand: eMachines Pages: 272
Alpha Microsystems Eagle 250 Owner'S Manual preview
Eagle 250
Brand: Alpha Microsystems Pages: 42

Brands by name

Popular brands

Load more brands