Configuring L2 Bridge Mode |
44
Configuring the Primary Bridge Interface
The primary bridge interface is your existing Internet gateway
device. The only step involved in setting up your primary bridge
interface is to ensure that the WAN interface is configured for a
static IP address. You will need this static IP address when
configuring the secondary bridge.
Note:
The primary bridge interface must have a static IP
assignment.
Configuring the Secondary Bridge Interface
Complete the following steps to configure the Dell SonicWALL
appliance:
1.
Navigate to the
Network
>
Interfaces
page from the
navigation panel.
2.
Click the Configure icon in the right column of the X0 (LAN)
interface.
3.
In the
IP Assignment
drop-down, select
Layer 2 Bridged
Mode
.
4.
In the
Bridged to
drop-down, select the
X1
interface.
5.
Configure management options (HTTP, HTTPS, Ping,
SNMP, SSH, User logins, or HTTP redirects).
E5500
Network Security Appliance
SonicWALL NSA E-Class
Network Gateway
L2 Bridge Link
Network Resources
X1
LAN
X0
Internet or
LAN Segment 2
Summary of Contents for NSA E5500
