Dell Networking S6000 System, Reference Manual

Page: 975 / 1510

Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Related
Commands redistribute — redistributes routes from other routing protocols into OSPF.
default-metric
Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the
redistribute
command.
S6000
Syntax
default-metric number
To return to the default values, use the
no default-metric [number]
command.
Parameters
number Enter a number as the metric. The range is from 1 to
16777214.
Defaults Disabled.
Command
Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Related
Commands redistribute — redistributes routes from other routing protocols into OSPF.
Open Shortest Path First (OSPFv2 and OSPFv3)
975