Dell Networking S6000 System, Reference Manual

Page: 587 / 1510

protocol frrp
Enter the Resilient Ring Protocol and designate a ring identification.
S6000
Syntax
protocol frrp { ring-id }
To exit the ring protocol, use the
no protocol frrp { ring-id }
command.
Parameters
ring-id Enter the ring identification number. The range is from 1 to
255.
Defaults none
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced
Usage
Information This command places you into the resilient ring protocol. After executing this
command, the command line prompt changes to
conf-frrp
.
show frrp
Display the resilient ring protocol configuration.
S6000
Syntax
show frrp [ ring-id [summary]] | [summary]
Parameters
ring-id Enter the ring identification number. The range is from 1 to
255
Force10 Resilient Ring Protocol (FRRP)
587