Dell Networking S6000 System, Reference Manual

Page: 251 / 1510

level-1 Enter the keyword
level-1
to redistribute matched routes
to IS-IS Level 1.
level-1-2 Enter the keyword
level-1-2
to redistribute matched
routes to IS-IS Level 1 and Level 2.
level-2 Enter the keyword
level-2
to redistribute matched routes
to IS-IS Level 2.
stub-area Enter the keyword
stub
to redistributed matched routes to
OSPF stub areas.
Defaults Not configured.
Command
Modes ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Dell Networking OS Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Related
Commands
set automatic-tag — computes the tag value of the route.
set metric — specifies the metric value assigned to redistributed routes.
set metric-type — specifies the metric type assigned to redistributed routes.
set tag — specifies the tag assigned to redistributed routes.
set local-preference
To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, configure a filter.
S6000
Syntax
set local-preference value
Access Control Lists (ACL)
251