Dell Networking S6000 System, Reference Manual

Page: 252 / 1510

To delete a BGP LOCAL_PREF attribute, use the
no set local-preference
command.
Parameters
value Enter a number as the LOCAL_PREF attribute value. The
range is from 0 to 4294967295.
Defaults Not configured.
Command
Modes ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information The
set local-preference
command changes the LOCAL_PREF attribute for
routes meeting the route map criteria. To change the LOCAL_PREF for all routes,
use the
bgp default local-preference
command.
Related
Commands bgp default local-preference — changes the default LOCAL_PREF attribute for all
routes.
set metric
To assign a new metric to redistributed routes, configure a filter.
S6000
Syntax
set metric [+ | -] metric-value
To delete a setting, enter
no set metric
.
Parameters
+ (OPTIONAL) Enter
+
to add a metric-value to the
redistributed routes.
252
Access Control Lists (ACL)