Dell Networking S6000 System, Reference Manual

Page: 1273 / 1510

Parameters
force-
authorized Enter the keywords
force-authorized
to forcibly
authorize a port.
auto Enter the keyword
auto
to authorize a port based on the
802.1X operation result.
force-
unauthorized Enter the keywords
force-unauthorized
to forcibly de-
authorize a port.
Defaults none
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
Version 7.4.1.0 Introduced on the E-Series.
Usage
Information The authenticator performs authentication only when
port-control
is set to
auto
.
dot1x quiet-period
Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
S6000
Syntax
dot1x quiet-period seconds
To disable quiet time, use the
no dot1x quiet-time
command.
Parameters
seconds Enter the number of seconds. The range is from 1 to 65535.
The default is
30 .
Defaults 30 seconds
Command
Modes INTERFACE
Security
1273