Command
Modes
INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1
Introduced on the Z9000.
Version 8.3.7.0
Introduced on the S4810.
Version 7.8.1.0
Introduced on the C-Series and S-Series.
Usage
Information
The list of secondary VLANs can be:
• Specified in comma-delimited or hyphenated-range format.
• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
— sets the mode of the selected VLAN to community, isolated,
or primary.
— sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
S6000
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the
no switchport mode
private-vlan
command.
Parameters
host
Enter the keyword
host
to configure the selected port or
port channel as an isolated interface in a PVLAN.
promiscuous
Enter the keyword
promiscuous
to configure the selected
port or port channel as an promiscuous interface.
trunk
Enter the keyword
trunk
to configure the selected port or
port channel as a trunk port in a PVLAN.
1088
Private VLAN (PVLAN)
Summary of Contents for Networking S6000 System
