Dell Networking 207 Series Regulatory Compliance And Safety Information Manual Download Page 2

2

Dell Networking 207 Series Access Points

| Regulatory Compliance and Safety Information Guide

FCC

This device is electronically labeled.
To view the FCC ID for controller-managed access points:
1. Log into the controller WebUI
2. Navigate to 

Maintenance > Controller > About

To view the FCC ID for Instant access points:
1. Log into the virtual controller WebUI
2. Navigate to 

Maintenance > About

FCC Class B Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause interference harmful to 
radio communications.
Operation is subject to the following conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

If this equipment does cause interference, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference 
by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio or TV technician for help.

Canada

Complies with the Class B limits for radio noise emissions as set out in the interference-causing equipment standard entitled “Digital Apparatus,” CAN ICES-3(B)/
NMB-3(B).

ATTENTION:  Les points d'accès sont considérés comme appareils de transmission radio et sont soumis aux réglementations gouvernementales 
du pays dans lequel ils sont déployés. Le ou les administrateurs réseau doivent s'assurer que la configuration et le fonctionnement de cet 
équipement sont conformes aux normes de leurs pays. De façon plus précise, les points d'accès doivent employer des canaux adaptés à leur 
emplacement physique. Pour obtenir une liste complète des canaux approuvés dans votre pays, reportez-vous aux notes de version DRT à 
l'adresse dell.com

CAUTION:  RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits. This equipment should be installed 
and operated with a minimum distance of 7.87 inches (20cm) between the radiator and your body for 2.4 GHz and 5 GHz operations. This 
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 

ATTENTION:  Déclaration sur les limites d'exposition aux radiofréquences:

 

cet équipement est conforme aux limites d'exposition aux 

rayonnements radioélectriques spécifiées par la FCC. Il doit être installé et utilisé à une distance minimale de 20 cm par rapport à votre corps 
pour les fréquences de 2,4 et 5 GHz. Cet émetteur-récepteur ne doit pas être utilisé ou situé à proximité d'autres antennes ou émetteurs-
récepteurs. 

CAUTION:  The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note 
that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the 
technology.

CAUTION:  Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority 
to operate this equipment.

ATTENTION:  Toute modification effectuée sur cet équipement sans l'autorisation expresse de la partie responsable de la conformité est 
susceptible d'annuler son droit d'utilisation.

Summary of Contents for Networking 207 Series

Page 1: ...ld be professionally installed by a certified technician The technician is responsible for ensuring that grounding is available and meets applicable national and electrical codes ATTENTION Tous les points d accès Dell doivent impérativement être installés par un professionnel agréé Ce dernier doit s assurer que l appareil est mis à la terre et que le circuit de mise à la terre est conforme aux cod...

Page 2: ...oumis aux réglementations gouvernementales du pays dans lequel ils sont déployés Le ou les administrateurs réseau doivent s assurer que la configuration et le fonctionnement de cet équipement sont conformes aux normes de leurs pays De façon plus précise les points d accès doivent employer des canaux adaptés à leur emplacement physique Pour obtenir une liste complète des canaux approuvés dans votre...

Page 3: ...aration of Conformity for these directives is available for viewing at dell com Medical 1 Equipment not suitable for use in the presence of flammable mixtures 2 Connect to only IEC 60950 1 or IEC 60601 1 3rd edition certified products and power sources The end user is responsible for the resulting medical system complies with the requirements of IEC 60601 1 3rd edition 3 Wipe with a dry cloth no a...

Page 4: ...ical and electronic equipment Specifically restricted materials under the RoHS Directive are Lead including Solder used in printed circuit assemblies Cadmium Mercury Hexavalent Chromium and Bromine Some Dell products are subject to the exemptions listed in RoHS Directive Annex 7 Lead in solder used in printed circuit assemblies Products and packaging will be marked with the RoHS label shown at the...

Reviews: