Dell N1100-ON, Reference Manual

Page: 945 / 2332

Security Commands
945
Keys are always displayed in their encrypted form in the running
configuration.
In an Access-Request, encrypted passwords are sent using the RSA Message
Digest algorithm (MD5).
The encryption algorithm is the same across switches. Encrypted passwords
may be copied from one switch and pasted into another switch configuration.
Command History
Updated in version 6.3.0.1 firmware.
Example
The following example sets the authentication encryption key.
console(config-tacacs)#key “This is a key string”
console(config-tacacs)#key 0 “This is a key string”
port
Use the port command in TACACS Configuration mode to specify a port
number on which a TACACS server listens for connections.
Syntax
port [port-number]
• port-number — The server port number. If left unspecified, the default
port number is 49. (Range: 0–65535)
Default Configuration
The default port number is 49.
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.