Dell N1100-ON, Reference Manual

Page: 702 / 2332

Layer 2 Switching Commands
702
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The CLI mode is changed to Policy-Class-Map Configuration when this
command is successfully executed.
The policy type dictates which of the individual policy attribute commands
are valid within the policy definition.
Example
The following example shows how to establish a new ingress DiffServ policy
named “DELL.”
console(config)#policy-map DELL in
console(config-policy-classmap)#
random-detect queue-parms
Use the random-detect queue-parms command to configure the WRED
green, yellow, and red TCP and non-TCP packet minimum and maximum
drop thresholds and corresponding drop probabilities on an interface or
globally.
NOTE:
On the N1500 Series switches, enable Simple RED since the
hardware is not capable of Weighted Red.
Syntax
random-detect queue-parms queue-id [ queue-id ] ... min-thresh minthresh-
green minthresh-yellow minthresh-red minthresh-nontcp max-thresh max-
thresh-green max-thresh-yellow max-thresh-red maxthresh-nontcp drop-
prob-scale drop-scale-green drop-scale-yellow drop-scale-red drop-scale-
nontcp [ ecn ]
no random-detect queue-parms queue-id [ queue-id ] ...