Dell N1100-ON, Reference Manual

Page: 404 / 2332

Layer 2 Switching Commands
404
Syntax
show interfaces description [ gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port]
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for all interfaces.
console>show interfaces description
Port Description
---- ------------------------------------------------
Gi1/0/1 Port that should be used for management only
Gi2/0/1
Gi2/0/2
Port Description
----- ----------------------------------------------------------------------
Po1
show interfaces detail
Use the show interfaces detail command to display detailed status and
configuration of the specified interface.
Syntax
show interfaces detail interface-id
• interface-id —
An Ethernet interface identifier or port channel identifier.