Dell N1100-ON, Reference Manual

Page: 2121 / 2332

Switch Management Commands
2121
downloading SupportAssist on behalf of a company or other legal entity, you
are further certifying to Dell that you have appropriate authority to provide
this consent on behalf of that entity. If you do not consent to the
collection, transmission and/or use of the Collected Data, you may not
download, install or otherwise use SupportAssist.
Example 2
console(config)# eula-consent support-assist reject
I do not accept the terms of the license agreement. The SupportAssist feature
has been deactivated and can no longer be used.
To enable SupportAssist configurations, accept the terms of the license
agreement by configuring this command 'eula-consent support-assist accept'.
contact-company
Use the contact-company command to configure the contact information to
be sent to the SupportAssist server. Use the no form of the command to
remove the contact information.
Syntax
contact-company name company street-address streetaddress address city
city country country postcode postcode
• company — The company for the technical contact person. Maximum
of 256 printable characters.
• streetaddress — The street address for the technical contact person.
Maximum of 99 printable characters.
• city — The city for the technical contact person. Maximum of 99
printable characters.
• country — The country for the technical contact person in Alpha-3
format-3 capital-case characters.
• postcode — The postal code for the technical contact person. Maximum
of 10 printable characters.
Enclose a parameter in quotes if an embedded blank is desired in the
parameter.
Default Configuration
No contact company information is populated by default.