Dell N1100-ON, Reference Manual

Page: 1705 / 2332

Layer 3 Routing Commands
1705
Example
console# show ip ospf statistics
Area 0.0.0.0: SPF algorithm executed 15 times
Delta T Intra Summ Ext SPF Total RIB Update Reason
00:05:33 0 0 0 0 0 R
00:05:30 0 0 0 0 0 R
00:05:19 0 0 0 0 0 N, SN
00:05:15 0 10 0 10 0 R, N, SN
00:05:11 0 0 0 0 0 R
00:04:50 0 60 0 60 460 R, N
00:04:46 0 90 0 100 60 R, N
00:03:42 0 70 10 90 160 R
00:03:39 0 70 40 120 240 X
00:03:36 0 60 60 130 160 X
00:01:28 0 60 50 130 240 X
00:01:25 0 30 50 110 310 SN
00:01:22 0 0 40 50 260 SN
00:01:19 0 0 20 20 190 X
00:01:16 0 0 0 0 110 R, X
show ip ospf stub table
Use the show ip ospf stub table command to display the OSPF stub table.
The information below will only be displayed if OSPF is initialized on the
switch.
Syntax
show ip ospf stub table [ vrf vrf-name]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes