Dell N1100-ON, Reference Manual

Page: 1320 / 2332

Layer 3 Routing Commands
1320
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
Example
console# show bgp ipv6 aggregate-address
Prefix/Len AS Set Summary Only Active
---------------- ------ ------------ ------
2001:DB8::/48 N Y Y
3ffe:4000:1::/48 N Y Y
show bgp ipv6 community
Use this command to display IPv6 routes that belong to the specified set of
communities. This command replaces and deprecates the show ipv6 bgp
community command
Syntax
show bgp ipv6 community communities [ exact-match ]
• communities—A string of zero or more community values, which may be
in either format and may contain the well-known community keywords no-
advertise and no-export. The output displays routes that belong to every
community specified in the command.
• exact-match — Only displays routes that are members of those and only
those communities specified in the command.
Field Description
Prefix/Len Destination prefix and prefix length.
AS Set Indicates if an empty AS path is advertised with the
aggregate address (N) or an AS SET is advertised with
the set of AS numbers for the paths contributing to the
aggregate (Y).
Summary Only Indicates if the individual networks are suppressed (Y)
or advertised (N).
Active Indicates if the aggregate is currently being advertised.