Dell N1100-ON, Reference Manual

Page: 1251 / 2332

Layer 3 Routing Commands
1251
console(config-router)# neighbor 172.20.1.1 remote-as 200
console(config-router)# neighbor 172.20.1.1 filter-list 1 in
ip bgp-community new-format
Use this command to display BGP standard communities in AA:NN format.
To display BGP standard communities as 32-bit integers, use the no form of
this command.
Syntax
ip bgp-community new-format
no ip bgp-community new-format
Default Configuration
Standard communities are displayed in AA:NN format.
Command Mode
Global Configuration mode
User Guidelines
RFC 1997 specifies that the first two bytes of a community number are
considered to be an autonomous system number. The new format displays a
community number as the ASN followed by a 16-bit AS-specific number.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console(config)# ip bgp-community new-format
ip bgp fast-external-fallover
Use the ip bgp fast-external-fallover command to configure fast external
failover behavior for a specific routing interface.
Syntax
ip bgp fast-external-fallover { permit | deny }