Dell N1100-ON, Reference Manual

Page: 1215 / 2332

Layer 3 Routing Commands
1215
router bgp
Use the router bgp command to enable BGP and identify the autonomous
system (AS) number for the router. Only a single instance of BGP can be run
and the router can only belong to a single AS.
Syntax
router bgp as-number
no router bgp as-number
• as-number—The router’s autonomous system number is asplain format.
Dell EMC Networking BGP supports two byte AS numbers, in the range of
0-65535.
Default Configuration
By default, BGP is inactive.
Command Mode
Global Configuration mode
User Guidelines
The no router bgp command disables BGP and all BGP configurations revert
to default values. Alternatively, the administrator can use the no enable
command in BGP router configuration mode to disable BGP globally without
clearing the BGP configuration.
ip bgp-community new-
format
neighbor timers show ip bgp update-group
ip bgp fast-external-fallover neighbor update-source show ip bgp vpn4
ip community-list network (BGP Router
Configuration)
show router-capability
ip extcommunity-list network (IPv6 Address
Family Configuration)
template peer
match extcommunity redistribute (BGP) timers bgp
maximum-paths (BGP
Router Configuration)
rd –