Dell N1100-ON, Reference Manual

Page: 1071 / 2332

Security Commands
1071
key-string
Use the key-string SSH Public Key Configuration mode to specify an SSH
public key manually.
Syntax
key-string key-string
key-string row key-string
• row — To specify the SSH public key row by row.
• key-string — The UU-encoded DER format is the same format as the
authorized keys file used by OpenSSH.
Default Configuration
By default, the key-string is empty.
Command Mode
SSH Public Key Configuration mode
User Guidelines
The key string is the public key of the specified type (RSA or DSA) generated
by the administrator. The administrator will need access to both the public
and private key on the host to log in without authenticating via password.
Enclose the key string in quotes.
DSA is considered less secure than RSA. Use of RSA is recommended.
Use the
key-string row command to enter the key-string one row at a time.
The row may be enclosed in quotes. This command may be used to enter the
key one line at a time should the key-string be greater than 234 characters in
length.
Use the
key-string command without the row parameter to enter the entire
key at once if the key-string does not exceed 234 characters.
Examples
The following example shows how to enter a single public key string for a user
called “bob.”