Dell Mid-Mount, Installation Procedure

Page: 7 / 10

Mid-Mount Rack Kit (Switch) Installation Procedure 7
53-1001791-01
FIGURE 3
Attaching front rails to a cabinet
Attaching rear brackets to a cabinet
Complete the following steps to attach the rear brackets to the cabinet.
1. Position the right rear bracket (Item 2) in the right rear of the switch ( Figure 4 ).
2. Attach the brackets using three 6-32 x 1/4 in. screws (Item 4) and retainer nuts (Item 6).
3. Adjust the brackets to cabinet depth and tighten the Item 6 screws to a torque of 9 in.-lbs (10 cm-kgs).
4. Repeat step 1 through step 3 to attach the left rear bracket (Item 1).
1 Bracket, front righ 6 Retainer nut, 10-32
5 Screw, 10-32 x 5/8 in., panhead Phillips
6
1 5