Dell M1530 - XPS laptop. TUXEDO Service Manual Download Page 70

Page: 70 / 118

Display Assembly

Remove the eight screws (four on each side) that secure the display panel

brackets to the display panel.

Replacing the Display Panel

Attach the display bracket to the display panel by replacing the four screws

on each side of the display panel.

Align the display panel with the display back and replace the six screws.

Replace the display bezel (see "Replacing the Display Bezel" on page 69).

Replace the display assembly (see "Replacing the Display Assembly" on

page 67).

Removing the Display Panel Cable

Remove the display assembly (see "Removing the Display Assembly" on

page 63).

display panel bracket (1 left, 1 right)

screw (8 total; 4 on each side)

Summary of Contents for M1530 - XPS laptop. TUXEDO























































































































Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands

Dell M1530 - XPS laptop. TUXEDO, Service Manual

Search results

Summary of Contents for M1530 - XPS laptop. TUXEDO

Reviews:

Related manuals for M1530 - XPS laptop. TUXEDO

Brands by name

Popular brands