Dell M109s - DLP Projector, User Manual, Page: 18 / 34

18
Using Your Projector
Picture menu provides the following options:
V
IDEO
M
ODE
—
Allows you to optimize the projector’s display mode: PC , Bright , sRGB
(provides more accurate color representation), Movie , and Custom (set your preferred
settings). If you adjust the settings for White Intensity or Degamma , the projector
automatically switches to Custom .
NOTE:
If you adjust the settings for
White Intensity
or
Degamma
, the projector
automatically switches to
Custom
.
B RIGHTNESS — Use and to adjust the brightness of the image.
C ONTRAST — Use and to adjust the display contrast.
S ATURATION — Allows you to adjust the video source from black and white to fully
saturated color. Press to decrease the amount of color in the image and to
increase the amount of color in the image.
S
HARPNESS
— Press to decrease the sharpness and to increase the sharpness.
T
INT
— Press to increase the amount of green in the image and to increase the
amount of red in the image (Selectable for NTSC only).
W
HITE
I
NTENSITY
— Set 0 to maximize the color reproduction and 10 to maximize the
brightness.
D
EGAMMA
—
Allows you to adjust among the 4 preset values (1, 2, 3, 4) to change the
color performance of the display.
C
OLOR
T
EMP
—
Allows you to adjust the color temperature. The screen appears cooler at
higher color temperatures and warmer at lower color temperatures. When you adjust
the values in the
Color Adjust menu, the Cust om mode is activated. The values are
saved in the Custom mode.
C OLOR A DJUST — Allows you to manually adjust the red, green, and blue colors.
S IGNAL T YPE — Manually select signal type Auto, RGB, YCbCr, or YPbPr.