Dell Latitude E7440 Series Owner'S Manual Download Page 2

Page: 2 / 67

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

2013 Dell Inc.

Trademarks used in this text: Dell

™

, the Dell logo, Dell Boomi

™

, Dell Precision

™

, OptiPlex

™

, Latitude

™

, PowerEdge

™

, PowerVault

™

PowerConnect

™

, OpenManage

™

, EqualLogic

™

, Compellent

™

, KACE

™

, FlexAddress

™

, Force10

™

and Vostro

™

are trademarks of Dell

Inc. Intel

, Pentium

, Xeon

, Core

and Celeron

are registered trademarks of Intel Corporation in the U.S. and other countries. AMD

is a registered trademark and AMD Opteron

™

, AMD Phenom

™

and AMD Sempron

™

are trademarks of Advanced Micro Devices, Inc.

Microsoft

, Windows

, Windows Server

, Internet Explorer

, MS-DOS

, Windows Vista

and Active Directory

are either trademarks

or registered trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat

and Red Hat

Enterprise Linux

are registered trademarks of Red Hat, Inc. in the United States and/or other countries. Novell

and SUSE

are

registered trademarks of Novell Inc. in the United States and other countries. Oracle

is a registered trademark of Oracle Corporation

and/or its affiliates. Citrix

, Xen

, XenServer

and XenMotion

are either registered trademarks or trademarks of Citrix Systems, Inc. in

the United States and/or other countries. VMware

, vMotion

, vCenter

, vCenter SRM

™

and vSphere

are registered trademarks or

trademarks of VMware, Inc. in the United States or other countries. IBM

is a registered trademark of International Business Machines

Corporation.

2013 - 07

Rev. A00

Summary of Contents for Latitude E7440 Series




































































Search results

Summary of Contents for Latitude E7440 Series

Reviews:

Related manuals for Latitude E7440 Series

Brands by name

Popular brands

Dell Latitude E7440 Series, Owner'S Manual

Search results

Summary of Contents for Latitude E7440 Series

Reviews:

Related manuals for Latitude E7440 Series

Brands by name

Popular brands