Option
Description
Hyper-Thread Control
Allows you to enable or disable the
HyperThreading in the processor.
Default Setting: Enabled
Table 7. Power Management
Option
Description
AC Behavior
Allows the computer to power on automatically, when AC adapter is plugged. The
option is disabled.
•
Wake on AC
Auto On Time
Allows you to set the time at which the computer must turn on automatically. The
options are:
•
Disabled (Default Setting)
•
Every Day
•
Weekdays
USB Wake Support
Allows you to enable the USB devices to wake the computer from standby mode.
The option is disabled
•
Enable USB Wake Support
Wireless Radio Control
Allows you to control the WLAN and WWAN radio. The options are:
•
Control WLAN radio
•
Control WWAN radio
Default Setting: both the options are disabled.
Wake on LAN/WLAN
This option allows the computer to power up from the off state when triggered by a
special LAN signal. Wake-up from the Standby state is unaffected by this setting
and must be enabled in the operating system. This feature only works when the
computer is connected to AC power supply.
•
Disabled - Does not allow the system to power on by special LAN signals when
it receives a wake-up signal from the LAN or wireless LAN. (Default Setting)
•
LAN Only - Allows the system to be powered on by special LAN signals.
•
WLAN Only
•
LAN or WLAN
Block Sleep
Allows you to block the computer from entering into the sleep state. This option is
disabled by default.
•
Block Sleep (S3)
Primary Battery Configuration
Allows you to define how to use the battery charge, when AC is plugged in. The
options are:
•
Adaptive (Default Setting)
•
Standard Charge
•
Express Charge
•
Primarily AC use
69
