Dell Latitude E6430s Owner'S Manual Download Page 59

Page: 59 / 77

Option

Description

•

Disabled

•

Enabled

•

Enabled w/PXE (Default Setting)

Parallel Port

Allows you to define and set how the parallel

port on the docking station operates. You can

set the parallel port to:

•

Disabled

•

PS2

•

ECP

Serial Port

Identifies and defines the serial port settings.

You can set the serial port to:

•

Disabled

•

COM1 (Default Setting)

•

COM2

•

COM3

•

COM4

NOTE: The operating system may allocate

resources even if the setting is disabled.

SATA Operation

Allows you to configure the internal SATA

hard-drive controller. The options are:

•

Disabled

•

ATA

•

AHCI

•

RAID On (Default Setting)

NOTE: SATA is configured to support RAID

mode.

Drives

Allows you to configure the SATA drives on

board. The options are:

•

SATA-0

•

SATA-1

•

SATA-4

•

SATA-5

Default Setting: All drives are enabled.

SMART Reporting

This field controls if the hard drive errors for

the integrated drives are reported during

system startup. This technology is part of the

SMART (Self Monitoring Analysis and

Reporting Technology) specification.

Summary of Contents for Latitude E6430s














































































Search results

Summary of Contents for Latitude E6430s

Reviews:

Related manuals for Latitude E6430s

Brands by name

Popular brands

Dell Latitude E6430s, Owner'S Manual

Search results

Summary of Contents for Latitude E6430s

Reviews:

Related manuals for Latitude E6430s

Brands by name

Popular brands