a. Disconnect the camera cable from the connector on the display assembly [1].
b. Lift the camera away from the display assembly [2].
Installing the camera
1.
Place the camera on the display assembly.
2.
Connect the camera cable to the connector on the display assembly
3.
Install the:
a.
display bezel
b.
display assembly
c.
WWAN
d.
WLAN
e.
battery
f.
base cover
4.
Follow the procedure in
After working inside your system
.
Removing the dock frame
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
hard drive assembly
or
M.2 SSD
or
PCIe SSD
d.
WLAN card
e.
WWAN card
3.
To remove the dock frame connectors:
a. Remove the screws that secure the dock frame to the computer [1].
b. Remove the screw and lift the SSD plate from the computer [2, 3].
NOTE: This step is required only if the PCIe SSD card is removed.
22