Installing the display assembly - Touch
1. Place the display assembly to align with the screw holders on the computer.
2. Tighten the screws to secure the display assembly to the computer.
3. Route the display cable through the routing channel and route the antenna cables by pushing it through the hole.
4. Connect the antenna cables and display cable to the connectors.
5. Place the display cable bracket over the connector and tighten the screw to secure the display cable to the computer.
6. Place the display hinge bracket and tighten the screw to secure it to the computer.
7. Install the:
a.
b.
c.
d.
After working inside your computer
.
Display hinges
Removing display hinge - non touch
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
3. To remove the hinges:
a. Remove the screws that secure the display hinge to the display assembly [1, 3].
b. Remove the display hinge [2, 4].
Disassembly and reassembly
25
