Display Assembly and Display Latch: Dell Latitude D505 Series Service Manual
Back to Contents Page
Display Assembly and Display Latch
Dell™ Latitude™ D505 Series Service Manual
Display Assembly
Display Bezel
Display Panel
Display Latch
Display Assembly
CAUTION:
Before performing the following procedures, read the safety
instructions in your
System Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
NOTICE:
You must remove the display assembly before you remove the palm
rest.
1. Follow the instructions in "
Preparing to Work Inside the Computer
."
2. Remove the
keyboard
.
3. Open the display assembly approximately 180 degrees, and support the display
assembly so that it does not open past this position.
4. Pull up on the pull-tab that is attached to the display cable connector to remove
the connector from the system board.
5. Release the display cable from the three display-cable routing clips.
file:///F|/Service%20Manuals/Dell/Latitude/d505/display.htm (1 of 12) [2/28/2004 8:13:51 AM]
