Display Assembly and Display Latch: Dell Latitude D500 Service Manual
2 M2 x 5-mm screws (6)
5 top cover
3 display bezel
6 M2 x 5-mm screws (4)
Display Bezel
CAUTION:
Before performing the following procedures, read the safety
instructions in your
System Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
1. Follow the instructions in "
Preparing to Work Inside the Computer
."
2. Remove the
keyboard
.
3. Remove the
display assembly
.
4. Use a plastic scribe to pry the six display bumpers out of the screw holes located
on the front of the bezel.
5. Remove the six M2 x 5-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to
the bezel.
6. Starting at the bottom of the display panel (by the DELL™ logo), use your
fingers to separate the bezel from the top cover by lifting the inside edge of the
bezel away from the top cover.
Display Panel
file:///F|/Service%20Manuals/Dell/Latitude/d500/display.htm (5 of 9) [2/28/2004 8:08:26 AM]
