Dell Latitude C840 Service Manual Download

Page: 41 / 78

Microprocessor Module: Dell Latitude C840 Service Manual

4. Remove the

microprocessor thermal-cooling assembly

NOTICE:

When removing the microprocessor module, pull the module straight up. Do not bend

the pins.

5. Remove the microprocessor module.

NOTICE:

To avoid damage to the microprocessor, hold the screwdriver so that it is

perpendicular to the microprocessor when loosening the cam screw (see "

Microprocessor Cam

Screw

").

a. Loosen the cam screw that secures the microprocessor module. The location of the screw

and the rotation direction may vary with the socket manufacturer; look for small icons

indicating open and locked positions.

Microprocessor Cam Screw (Example)

NOTICE:

Hold the microprocessor down while turning the cam screw to prevent intermittent

contact between the cam screw and microprocessor.

1 cam screw

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Latitude/C840/C840_SERVICE_MANUAL/cpu.htm (2 of 4)6/21/2004 1:36:18 AM

Summary of Contents for Latitude C840















































































Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands

Dell Latitude C840, Service Manual

Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands