Dell Latitude C840 Service Manual Download

Page: 20 / 78

System Upgrades: Dell Latitude C840 Service Manual

Mini PCI Card

You must remove the optional Mini PCI wireless modem (if installed) before the system board can be

removed. A wireless modem card must be connected to the internal antenna of the computer.

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any

installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically

touching unpainted metal on the computer.

Mini PCI Card Cover

M2.5 x 20-mm screw

Removing the Mini PCI Card

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Remove the M2.5 x 20-mm screw and then remove the Mini PCI card cover.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/C840/C840_SERVICE_MANUAL/upgrades.htm (6 of 8)6/21/2004 1:36:13 AM

Summary of Contents for Latitude C840















































































Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands

Dell Latitude C840, Service Manual

Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands