Dell Latitude C840 Service Manual Download

Page: 40 / 78

Microprocessor Module: Dell Latitude C840 Service Manual

Back to Contents Page

Microprocessor Module

Dell™ Latitude™ C840 Service Manual

NOTICE:

Disconnect the computer and attached devices from electrical outlets and remove any

installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by periodically

touching unpainted metal on the computer.

Removing the Microprocessor Module

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Remove the

keyboard

3. Remove the

hinge cover

NOTICE:

To ensure maximum cooling for the microprocessor, do not touch the heat transfer

areas on the microprocessor thermal-cooling assembly. The oils in your skin reduce the heat

transfer capability of the thermal pads.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Latitude/C840/C840_SERVICE_MANUAL/cpu.htm (1 of 4)6/21/2004 1:36:18 AM

Summary of Contents for Latitude C840















































































Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands

Dell Latitude C840, Service Manual

Search results

Summary of Contents for Latitude C840

Reviews:

Related manuals for Latitude C840

Brands by name

Popular brands