Table 12. Passwords
Options
Description
Admin Password
This field allows the user to set, change, or delete the
administrator password.
System Password
This field allows the user to set, change, or delete the system
password.
NVMe SSD0
This field allows the user to set, change, or delete the storage
drive password.
Password Configurator
Upper Case Letter
Enable or disable reinforced use of upper case letters (OFF by
default).
Lower Case Letter
Enable or disable reinforced use of lower case letters (OFF by
default).
Digit
Enable or disable reinforced use of at least one digit (OFF by
default).
Special Character
Enable or disable reinforced use of at least one special
character (OFF by default).
Minimum Character
Allows the user to select the number of characters allowed for
a password (4 is the default value).
Password Bypass
Password Bypass
When enabled, this always prompts for system and internal
hard drive passwords when powered on from Off state.
Options available are as below:
●
Disabled (selected by default)
●
Reboot Bypass
Password Changes
Enable Non-Admin Password Changes
This section contains a toggle switch which when on, user can
change system and hard drive password without the need for
admin password (OFF by default).
Admin Setup Lockout
Enable Admin Setup Lockout
This section contains a toggle switch which allows the
administrator to control how users can or cannot access BIOS
setup (OFF by default).
Active Password Lockout
Enable Active Password Lockout
This section contains a toggle switch which allows the user to
disable active password support (OFF by default).
Master Password Lockout
This section contains a toggle switch which allows the
administrator to disable the master password support. The
hard disk passwords must be cleared before changing the
setting (OFF by default).
Allow Non-Admin PSID Revert
This section controls the access to the Physical Security
ID (PSID) revert of NVMe hard-drives from Dell Security
Manager prompt OFF by default).
70
System setup
