Dell Latitude 7390 2-in-1 Owner'S Manual Download Page 56

Page: 56 / 72

Wireless screen options

Option

Description

Wireless Switch

Allows to set the wireless devices that can be controlled by the wireless switch. The options are:

•

WWAN

•

GPS (on WWAN Module)

•

WLAN

•

Bluetooth

All the options are enabled by default.

NOTE:

For WLAN enable or disable controls are tied together and they cannot be enabled or disabled

independently.

Wireless Device
Enable

Allows you to enable or disable the internal wireless devices.

•

WWAN/GPS

•

WLAN

•

Bluetooth

All the options are enabled by default.

NOTE:

IMEI number for WWAN can be found ont the outer box or the WWAN card.

Maintenance screen options

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.

BIOS Downgrade

This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is enabled by
default.

Data Wipe

This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next boot' is not
enabled by default. The following is list of devices affected:

•

Internal SATA HDD/SSD

•

Internal M.2 SATA SDD

•

Internal M.2 PCIe SSD

•

Internal eMMC

BIOS Recovery

This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary hard
drive or an external USB key.

•

BIOS Recovery from Hard Drive—enabled by default

•

Always perform integrity check—disabled by default

System setup

Summary of Contents for Latitude 7390 2-in-1









































































Search results

Summary of Contents for Latitude 7390 2-in-1

Reviews:

Related manuals for Latitude 7390 2-in-1

Brands by name

Popular brands

Dell Latitude 7390 2-in-1, Owner'S Manual

Search results

Summary of Contents for Latitude 7390 2-in-1

Reviews:

Related manuals for Latitude 7390 2-in-1

Brands by name

Popular brands