Removing system board
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
NOTE:
To remove both cards if equipped and no need to remove the blank filler
c
d
e
f
g
h
3
Disconnect the :
a IR camera and touchscreen cable [1].
b Remove the 2 (M 2 x 1.7L) screws that secure the eDP bracket and lift it away from the computer [2].
c Disconnect the eDP cable from the system board [3].
d Disconnect th G-sensor and eDP cables [4].
4
Disconnect the following cables from the system board .
a Touchpad cable
b USH cable
c LED board cable
Removing and installing components
27