Dell Latitude 7390 2-in-1, Owner'S Manual, Page: 12 / 72

b Lift the thermal plate from the SSD card [2].
c Remove the SSD card from the slot [3].
Installing the NVMe SSD
1 Insert the NVMe SSD card into the connector.
2 Install the thermal plate over the SSD card.
3 Tighten the 2 (M2.0 x 3.0) screws to secure the SSD thermal plate.
4 Install the:
a Battery
b Base cover
c SIM card tray
d MicroSD card
NOTE: To install both cards if equipped.
5 Follow the procedure in After working inside your computer .
WLAN card
Removing the WLAN card
1 Follow the procedure in Before working inside your computer .
2 Remove:
a MicroSD card
b SIM card tray
NOTE: To remove both cards if equipped and no need to remove the blank filler
c Base cover
12 Removing and installing components